![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Mark Forums Read |
| Amateur Radios HAM spoken here! |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
I'm going to be putting my 2 meter back in my truck in a few days, and i cant remember what freq's you use to tune the antenna. I know sounds like a dumb question, but i cant remember. Thanks
|
|
#2
|
|||
|
|||
|
144.000MHz through 148.000MHz
![]() |
|
#3
|
||||
|
||||
|
well according to my old instructions from my wilson 2 meter, and it says to use 146.280 and just use it till you get the lowest swr.
|
|
#4
|
|||
|
|||
|
146.600 would be a good choice if you are planning on talking on any repeaters.
|
|
#5
|
|||
|
|||
|
If you plan on working repeaters then you would want to tune @ 146.600 for the lowest Swr. Hope this helps.
|
|
#6
|
|||
|
|||
|
If you have a particular repeater that you use, then I would tune the antenna for that repeater. If there are several you use, average the frequency spread and tune for that.
- 'Doc |
![]() |
| Thread Tools | |
| Display Modes | |
|
|